Using molecularly dissolved drug concentrations in PBBMs improves the prediction of oral absorption from supersaturating formulations.

Predicting the absorption of drugs from enabling formulations is still challenging due to the limited capabilities of standard physiologically based biopharmaceutics models (PBBMs) to capture complex absorption processes. Amongst others, it is often assumed that both, molecularly and apparently dissolved drug in the gastrointestinal lumen are prone to absorption. A recently introduced method for measuring concentrations of molecularly dissolved drug in a dynamic in vitro dissolution setup using microdialysis has opened new opportunities to test this hypothesis and refine mechanistic PBBM approaches. In the present study, we compared results of PBBMs that used either molecularly or apparently dissolved concentrations in the simulated gastrointestinal lumen as input parameters. The in vitro dissolution data from three supersaturating formulations of Posaconazole (PCZ) were used as model input. The modeling outcome was verified using PCZ concentration vs. time profiles measured in human intestinal aspirates and in the blood plasma. When using apparently dissolved drug concentrations (i.e., the sum of colloid-associated and molecularly dissolved drug) the simulated systemic plasma exposures were overpredicted, most pronouncedly with the ASD-based tablet. However, if the concentrations of molecularly dissolved drug were used as input values, the PBBM resulted in accurate prediction of systemic exposures for all three PCZ formulations. The present study impressively demonstrated the value of considering molecularly dissolved drug concentrations as input value for PBBMs of supersaturating drug formulations.

An Electrochemical Aptasensor for the Detection of Freshwater Cyanobacteria.

Aphanizomenon is a genus of cyanobacteria that is filamentous and nitrogen-fixing and inhabits aquatic environments. This genus is known as one of the major producers of cyanotoxins that can affect water quality after the bloom period. In this study, an electrochemical aptasensor is demonstrated using a specific aptamer to detect Aphanizomenon sp. ULC602 for the rapid and sensitive detection of this bacterium. The principal operation of the generated aptasensor is based on the conformational change in the aptamer attached to the electrode surface in the presence of the target bacterium, resulting in a decrease in the current peak, which is measured by square-wave voltammetry (SWV). This aptasensor has a limit of detection (LOD) of OD750~0.3, with an extension to OD750~1.2 and a sensitivity of 456.8 µA·OD750-1·cm-2 without interference from other cyanobacteria. This is the first aptasensor studied that provides rapid detection to monitor the spread of this bacterium quickly in a targeted manner.

Drug Dissolution in Oral Drug Absorption: Workshop Report.

The in-person workshop "Drug Dissolution in Oral Drug Absorption" was held on May 23-24, 2023, in Baltimore, MD, USA. The workshop was organized into lectures and breakout sessions. Three common topics that were re-visited by various lecturers were amorphous solid dispersions (ASDs), dissolution/permeation interplay, and in vitro methods to predict in vivo biopharmaceutics performance and risk. Topics that repeatedly surfaced across breakout sessions were the following: (1) meaning and assessment of "dissolved drug," particularly of poorly water soluble drug in colloidal environments (e.g., fed conditions, ASDs); (2) potential limitations of a test that employs sink conditions for a poorly water soluble drug; (3) non-compendial methods (e.g., two-stage or multi-stage method, dissolution/permeation methods); (4) non-compendial conditions (e.g., apex vessels, non-sink conditions); and (5) potential benefit of having both a quality control method for batch release and a biopredictive/biorelevant method for biowaiver or bridging scenarios. An identified obstacle to non-compendial methods is the uncertainty of global regulatory acceptance of such methods.

Hydrogenated phospholipid, a promising excipient in amorphous solid dispersions of fenofibrate for oral delivery: Preparation and in-vitro biopharmaceutical characterization.

Amorphous solid dispersions (ASD) represent a viable formulation strategy to improve dissolution and bioavailability of poorly soluble drugs. Our study aimed to evaluate the feasibility and potential role of hydrogenated phospholipid (HPL) as a matrix material and solubilizing additive for binary (alone) or ternary (in combination with polymers) solid dispersions, using fenofibrate (FEN) as the model drug. FEN, incorporated within ASDs by melting or freeze-drying (up to 20% m/m), stayed amorphous during short-term stability studies. The solubility enhancing potential of HPL depended on the dissolution medium. In terms of enhancing in vitro permeation, solid dispersions with HPL were found equally or slightly more potent as compared to the polymer-based ASD. For studied ASD, in vitro permeation was found substantially enhanced as compared to a suspension of crystalline FEN and at least equal compared to marketed formulations under comparable conditions (literature data). Additionally, while the permeation of neat FEN and FEN in binary solid dispersions was affected by the dissolution medium (i.e., the "prandial state"), for ternary solid dispersions the permeation was independent of the "prandial state" (FaSSIF = FeSSIF). This suggests that ternary solid dispersions containing both polymer and HPL may represent a viable formulation strategy to mitigate fenofibrate's food effect.

In vitro dissolution/permeation tools for amorphous solid dispersions bioavailability forecasting I: Experimental design for PermeaLoop™.

Along with the increasing demand for candidate-enabling formulations comes the need for appropriate in vitro bioavailability forecasting. Dissolution/permeation (D/P) systems employing cell-free permeation barriers are increasingly gaining interest, due to their low cost and easy application as passive diffusion bio-predictive profiling in drug product development, as this accounts for nearly 75% of new chemical entities (NCEs) absorption mechanism. To this end, this study comprises theoretical considerations on the design and experimental work towards the establishment and optimization of a PermeaLoop™ based dissolution/permeation assay to simultaneously evaluate the drug release and permeation using Itraconazole (ITZ)-based amorphous solid dispersions (ASD) formulations, with different drug loads, based on a solvent-shift approach. Alternative method conditions were tested such as: donor medium, acceptor medium and permeation barrier were screened using both PermeaPad® and PermeaPlain® 96-well plates. A range of solubilizers, namely Sodium Dodecyl Sulfate, Vitamin E-TPGS and hydroxypropyl-ß-cyclodextrin, were screened as possible solubilizing additives to the acceptor medium, while donor medium was varied between blank FaSSIF (phosphate buffer) and FaSSIF. The method optimization also included the ITZ dose selection, being the ITZ single dose (100 mg) considered the most adequate to be used in further experiments to allow the comparison with in vivo studies. In the end, a standardized approach that may be applied to predict the bioavailability of weakly basic poorly soluble drug-based formulations is described, contributing to strengthening the analytical portfolio of in vitro pre-clinical drug product development.

In vitro dissolution/permeation tools for amorphous solid dispersions bioavailability forecasting II: Comparison and mechanistic insights.

Along with the increasing demand for complex formulations comes the need for appropriate in vitro methodologies capable of predicting their corresponding in vivo performance and the mechanisms controlling the drug release which can impact on in vivo drug absorption. In vitro dissolution-permeation (D/P) methodologies that can account for the effects of enabling formulations on the permeability of drugs are increasingly being used in performance ranking during early development stages. This work comprised the application of two different cell-free in vitro D/P setups: BioFLUX™ and PermeaLoop™ to evaluate the dissolution-permeation interplay upon drug release from itraconazole (ITZ)- HPMCAS amorphous solid dispersions (ASDs) of different drug loads. A solvent-shift approach was employed, from a simulated gastric environment to a simulated intestinal environment in the donor compartment. PermeaLoop™ was then combined with microdialysis sampling to separate the dissolved (free) drug from other species present in solution, like micelle-bound drug and drug-rich colloids, in real time. This setup was applied to clarify the mechanisms for drug release and permeation from these ASDs. In parallel, a pharmacokinetic study (dog model) was conducted to assess the drug absorption from these ASDs and to compare the in vivo results with the data obtained from each in vitro D/P setup, allowing to infer which would be the most adequate setup for ASD ranking. Even though both D/P systems resulted in the same qualitative ranking, BioFLUX™ overpredicted the difference between the in vivo AUC of two ASDs, whereas PermeaLoop™ permeation flux resulted in a good correlation with the AUC observed in pharmacokinetic studies (dog model) (R2 ≈ 0.98). Also, PermeaLoop™ combined with a microdialysis sampling probe clarified the mechanisms for drug release and permeation from these ASDs. It demonstrated that the free drug was the only driving force for permeation, while the drug-rich colloids kept permeation active for longer periods by acting as drug reservoirs and maintaining constant high levels of free drug in solution, which are then immediately able to permeate. Hence, the data obtained points BioFLUX™ and PermeaLoop™ applications to different momentums in the drug product development pipeline: while BioFLUX™, an automated standardized method, poses as a valuable tool for initial ASD ranking during the early development stages, PermeaLoop™ combined with microdialysis sampling allows to gain mechanistic understanding of the dissolution-permeation interplay, being crucial to fine tune and identify leading ASD candidates prior to in vivo testing.

Combining in vitro dissolution/permeation with microdialysis sampling: Capabilities and limitations for biopharmaceutical assessments of supersaturating drug formulations.

Many novel small drug molecules are poorly water-soluble and thus, enabling drug formulations may be required to ensure sufficient absorption upon oral administration. Biopharmaceutical assessment and absorption prediction of enabling formulations, however, remains challenging. Combined in vitro dissolution/permeation (D/P) assays have gained increasing interest since they may provide a more realistic formulation ranking based on the drug permeation profiles from different formulations as compared to conventional dissolution, which captures both readily permeable and not readily permeable fractions of "dissolved" drug. Moreover, the combined in vitro D/P assays allow to better predict intestinal supersaturation and precipitation processes as compared to simple dissolution setups due to the effect of an absorptive sink. Microdialysis on the other hand has proven useful to determine molecularly dissolved drug in colloidal dispersions, thus allowing for a deeper mechanistic insight into the mechanism of drug release from supersaturating formulations. Here, microdialysis sampling from the donor compartment was used in combination with the dissolution/permeation (D/P) tool PermeaLoop™ to study commercial supersaturating drug formulations of the poorly soluble and weakly basic drug Posaconazole (PCZ). An amorphous solid dispersion (ASD)-based tablet, as well as a crystalline suspension in acidified and neutral dilution medium, respectively, were tested. Microdialysis sampling allowed for differentiation between molecularly dissolved and micellar drug concentration, as expected, but, surprisingly, it was found that the presence of the microdialysis probe affected the precipitation behavior of a crystalline suspension within the two-stage D/P setup, simulating the oral administration of the acidified PCZ (Noxafil®) suspension: the extent and duration of supersaturation in the donor decreased significantly, which also affected permeation. Similarly, for the ASD-based tablet, a less pronounced supersaturation was observed during the first 120 min of the experiment. Hence, in this case, the formulation ranking and the prediction of intestinal supersaturation in the in vitro D/P assay became less predictive as compared to a conventional PermeaLoop™ study without microdialysis sampling. It was concluded that valuable mechanistic insights into the molecularly dissolved drug profiles over time can be obtained by microdialysis. However, since the presence of the probe may affect the degree of supersaturation and precipitation, a conventional D/P assay (without microdialysis sampling) is preferred for formulation ranking of supersaturating drug formulations.

Insight into the mechanism behind oral bioavailability-enhancement by nanosuspensions through combined dissolution/permeation studies.

As numerous new drug candidates are poorly water soluble, enabling formulations are needed to increase their bioavailability for oral administration. Nanoparticles are a conceptually simple, yet resource consuming strategy for increasing drug dissolution rate, as predicting in vivo oral absorption using in vitro dissolution remains difficult. The objective of this study was to obtain insight into nanoparticle characteristics and performance utilizing an in vitro combined dissolution/permeation setup. Two examples of poorly soluble drugs were examined (cinnarizine and fenofibrate). Nanosuspensions were produced by top-down wet bead milling using dual asymmetric centrifugation, obtaining particle diameters of approx. 300 nm. DSC and XRPD studies indicated that nanocrystals of both drugs were present with retained crystallinity, however with some disturbances. Equilibrium solubility studies showed no significant increase in drug solubility over the nanoparticles, as compared to the raw APIs. Combined dissolution/permeation experiments revealed significantly increased dissolution rates for both compounds compared to the raw APIs. However, there were substantial differences between the dissolution curves of the nanoparticles as fenofibrate exhibited supersaturation followed by precipitation, whereas cinnarizine did not exhibit any supersaturation, but instead a shift towards faster dissolution rate. Permeation rates were found significantly increased for both nanosuspensions when compared to the raw APIs, indicating a direct implication that formulation strategies are needed, be it stabilization of supersaturation by precipitation inhibition and/or dissolution rate enhancement. This study indicates that in vitro dissolution/permeation studies can be employed to better understand the oral absorption enhancement of nanocrystal formulations.

Interaction of liposomes with bile salts investigated by asymmetric flow field-flow fractionation (AF4): A novel approach for stability assessment of oral drug carriers.

For oral drug delivery the stability of liposomes against intestinal bile salts is of key importance. Here, asymmetric flow field-flow fractionation (AF4) coupled to multi-angle laser light scattering (MALLS) and a differential refractive index (dRI) detector was employed to monitor structural re-arrangement of liposomes upon exposure to the model bile salt taurocholate. For comparison, a conventional stability assay was employed using a hydrophilic marker and size exclusion chromatography (SEC) to separate released from liposome-entrapped dye. Calcein-containing liposomes with and without cholesterol were compared in terms of their in vitro stability upon exposure to bile salts by separating liposomes from co-existing colloidal species emerging after stress test using AF4/MALLS/dRI. Dynamic light scattering (DLS) was utilized in parallel. Our AF4/MALLS/dRI results suggested that exposure of egg-phospholipid liposomes to bile salts at physiological concentrations led to the formation of two new species of colloidal associates, likely (mixed) micelles. Subjecting cholesterol-containing liposomes to the same bile media did not lead to any new colloidal structures, indicating increased stability of these liposomes. Our SEC-based release assay largely confirmed these findings, indicating that AF4/MALLS/dRI is a suitable technique for prediction of in vitro oral stability of liposomal formulations. Moreover, the powerful AF4/MALLS/dRI technique appears promising to improve the understanding of the underlying mechanisms during bile salt-induced liposomal breakdown.

When Interactions Between Bile Salts and Cyclodextrin Cause a Negative Food Effect: Dynamic Dissolution/Permeation Studies with Itraconazole (Sporanox®) and Biomimetic Media.

The marketed oral solution of itraconazole (Sporanox®) contains 40% (259.2 mM) of 2-hydroxypropyl-ß-cyclodextrin (HP-ß-CD). The obvious role of HP-ß-CD is to solubilize itraconazole and to overcome its poor aqueous solubility that restricts its absorption. In this study, we investigated the biorelevance of in vitro experiments by the influence of biomimetic media (containing bile salts and phospholipids) on the predicted itraconazole absorption from the commercial HP-ß-CD-based Sporanox® solution. We performed phase-solubility studies of itraconazole and dynamic 2-step-dissolution/permeation studies using a biomimetic artificial barrier, Sporanox® solution, and fasted state simulated intestinal fluid (FaSSIF_V1). Both FaSSIF_V1 and HP-ß-CD increased the apparent solubility of itraconazole when used individually. In combination, their solubility-enhancing effects were not additive probably due to the competition of bile salts with itraconazole for the hydrophobic cavity of HP-ß-CD. Our combined dissolution/permeation experiments indicated the occurrence of a transient supersaturation from Sporanox® upon two-step dissolution. Through systematic variation of bile salt concentrations in the biomimetic media, it was observed that the extent and the duration of supersaturation depend on the concentrations of bile salts: supersaturation was rather stable in the absence of bile salts and phospholipids. The higher the bile salt concentration, the faster the collapse of the transient supersaturation occurred, an effect which is nicely mirrored by reduced in vitro permeation across the barrier. This is an indication of a negative food effect, which in fact correlates well with what earlier had been observed in clinical studies for Sporanox® solution. In essence, we could demonstrate that in vitro two-stage dissolution/permeation experiments using an artificial barrier and selected biomimetic media may predict the negative effects of the latter on cyclodextrin-based drug formulations like Sporanox® Oral Solution and, at the same time, provide a deeper mechanistic insight.

In-vitro dynamic dissolution/bioconversion/permeation of fosamprenavir using a novel tool with an artificial biomimetic permeation barrier and microdialysis-sampling.

Fosamprenavir is a phosphate ester prodrug that, upon dissolution, is cleaved to the poorly soluble yet readily absorbable parent drug amprenavir. In this study, a novel cell-free in vitro setup with quasi-continuous monitoring of the dynamic dissolution/bio-conversion/permeation of fosamprenavir was designed and tested. It consists of side-by-side diffusion cells, where the donor and acceptor compartments are separated by the biomimetic barrier PermeaPad®, and sampling from the donor compartment is accomplished via a microdialysis probe. Externally added bovine alkaline phosphatase induced bioconversion in the donor compartment. Microdialysis sampling allowed to follow the enzymatic conversion of fosamprenavir to amprenavir by the bovine alkaline phosphatase in an (almost) real-time manner eliminating the need to remove or inactivate the enzyme. Biomimetic conversion rates in the setup were established by adding appropriate amounts of the alkaline phosphatase. A substantial (6.5-fold) and persistent supersaturation of amprenavir was observed due to bioconversion at lower (500 µM) concentrations, resulting in a substantially increased flux across the biomimetic barrier, nicely reflecting the situation in vivo. At conditions with an almost 10-fold higher dose than the usual human dose, some replicates showed premature precipitation and collapse of supersaturation, while others did not. In conclusion, the proposed novel tool appears very promising in gaining an in-depth mechanistic understanding of the bioconversion/permeation interplay, including transient supersaturation of phosphate-ester prodrugs like fosamprenavir.

Growth of freshwater cyanobacterium Aphanizomenon sp. ULC602 in different growing and nutrient conditions.

Aphanizomenon sp. ULC602, recently isolated in a Belgian lake, is a filamentous, nitrogen-fixing, freshwater cyanobacterium that is one of the primary producers of cyanotoxins following its bloom formation, causing water contamination. This study aims to evaluate the effects of growing conditions and essential nutrients on the growth of Aphanizomenon sp. ULC602 via its production of chlorophyll-a (Chlo-a). Our results indicated that this bacterium could grow well at temperatures ranging from 18 to 25°C with an optimal pH of 6.0-7.5 under continuous lighting. It grew slowly in the absence of a carbon source or at lower carbon concentrations. The addition of nitrogen from nitrate and urea led to a less than 50% reduction of Chlo-a content compared to the medium lacking nitrogen. The iron bioavailability significantly stimulated the Chlo-a production, but it was saturated by an iron concentration of 0.115 mM. Moreover, a decrease in Chlo-a biomass was observed under sulfur deficiency. The bacterium could not grow well in media containing various phosphorus sources. In conclusion, as the growth and consequent forming bloom of cyanobacteria can be stimulated or inhibited by environmental conditions and eutrophication, our investigation could contribute to further studies to control the blooming of the target bacterium in freshwater.

How docetaxel entrapment, vesicle size, zeta potential and stability change with liposome composition-A formulation screening study.

Limitations of the anticancer drug product Taxotere® have encouraged researchers to entrap the active ingredient docetaxel (DTX) into nanocarriers such as liposomes. However, until now no DTX-liposome formulation has reached the clinic. Hence, in the present study, different Soy-PC based DTX-liposome formulations were screened in an attempt to identify lipid-compositions with promising DTX-entrapment (DTX-EE). Various other quality attributes, such as vesicle size and morphology, poly dispersity index (PDI), zeta potential (ZP), stability and in vitro drug release were also investigated. In an initial study, the inclusion of charged lipids within the liposome bilayer was observed to have a positive effect on DTX-EE. Thus, cationic DOTAP (1,2-Dioleoyl-3-trimethylammonium-propane) and anionic DMPG (1,2-Dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) lipids were selected for further investigations. With anionic DMPG, only a temporary rise in EE was gained with ≥ 20% (w/w) DMPG in Soy-PC lipid-based liposomes, whereas a concentration-dependent increase in EE was observed with cationic DOTAP. A DTX-EE > 95% was obtained with only 5% (w/w) DOTAP in Soy-PC, while neutral liposomes formed from Soy-PC alone, gave 41.5% DTX-EE. In the stability study, a DOTAP concentration > 10% (w/w) in Soy-PC was found to facilitate a stable DTX-EE > 90% after 12 weeks storage. The positive effect of cationic lipids on the EE was confirmed when replacing cholesterol (CHOL), initially shown to suppress DTX-entrapment, with cationic 3ß-[N-(N',N'-dimethylaminoethane)-carbamoyl]Cholesterol (DC-CHOL). Here, DTX-EE was improved from 29.8% to 92.0% (w/w) with 10% (w/w) CHOL and DC-CHOL in Soy-PC, respectively. Finally, PEGylation of DOTAP-liposomes with DSPE-PEG2000 and DSPE-PEG750 reduced the DTX-EE relative to DOTAP-liposome with no PEGylation. As with the DMPG-liposomes, a temporarily raised affinity between DTX and liposomes was obtained with anionic DSPE-PEGylation of Soy-PC liposomes, however, this effect was not maintained after 4 weeks storage. However, in a dialysis set-up, cationic DOTAP-liposomes released DTX to a higher extent than PEGylated liposomes. Thus, the optimal formulation with regard to storage stability and in vivo performance need to be investigated further, applying conditions that are closer to mimic the in vivo-situation. Applying the Dual Asymmetric Centrifugation (DAC) method in liposome production appears favourable due to its good reproducibility. The observed increase in DTX entrapment with cationic lipids or PEGylation appears scalable into pilot manufacturing scale.

Biopredictive capability assessment of two dissolution/permeation assays, µFLUX™ and PermeaLoop™, using supersaturating formulations of Posaconazole.

The majority of new drug entities exhibits poor water solubility and therefore enabling formulations are often needed to ensure sufficient in vivo bioavailability upon oral administration. Several in vitro tools have been proposed for biopredictive screening of such drug formulations to facilitate formulation development. Among these, combined dissolution/permeation (D/P) assays have gained increasing interest in recent years, since they are presumed to better predict the absorption behavior as compared to single-compartment dissolution assays. Moreover, especially for supersaturating formulations, it has been demonstrated that the presence of an absorption sink better mimics the intraluminal supersaturation performance. The present study aimed to investigate the biopredictive abilities of two in vitro D/P setups to predict intestinal supersaturation and systemic absorption of supersaturable systems. Experiments were performed with a µFLUX™ and PermeaLoop™ apparatus, respectively, which differ primarily in their volume-to-area ratios between donor compartment and membrane as well as in the type of biomimetic barrier. A two-stage dissolution protocol was adopted to mimic the transit from acidic stomach to more neutral intestinal fluids using biomimetic media. Three formulations of the weakly basic compound Posaconazole (PCZ), namely an acidified and a neutral suspension and an amorphous solid dispersion (ASD) tablet, were tested. Under the present conditions, and for the specific set of formulations studied here, PermeaLoop™ showed a better biopredictive ability for intestinal supersaturation and systemic absorption for the three formulations than the µFLUX™ D/P setup. Interestingly, minor modifications of the two-stage D/P protocol in terms of medium transfer rates from simulated gastric fluid (SGF) to fasted state simulated intestinal fluid (FaSSIF) had a substantial impact particularly on the permeation of the crystalline PCZ suspension ("acidified suspension"). The ASD tablet was less sensitive to gradual medium changes than the crystalline PCZ suspensions. The current study confirms the usefulness of D/P assays for formulation ranking of weakly basic compounds and supersaturating formulations.

Main Metabolites of Pseudomonas aeruginosa: A Study of Electrochemical Properties.

Pseudomonas aeruginosa is a ubiquitously distributed soil and water bacterium and is considered an opportunistic pathogen in hospitals. In cystic fibrosis patients, for example, infections with P. aeruginosa can be severe and often lead to chronic or even fatal pneumonia. Therefore, rapid detection and further identification are of major importance in hospital hygiene and infection control. This work shows the electrochemical properties of five P. aeruginosa key metabolites considering their potential use as specific signaling agents in an electrochemical sensor system. The pure solutes of pyocyanin (PYO), Pseudomonas quinolone signal (PQS), pyochelin (PCH), 2-heptyl-4-hydroxyquinoline (HHQ), and 2-heptyl-4-hydroxyquinoline N-oxide (HQNO) were analyzed by different electrochemical techniques (cyclic and square wave voltammetry) and measured using a Gamry Reference 600+ potentiostat. Screen-printed electrodes (DropSens DRP110; carbon working and counter, silver reference electrode) were used to determine signal specificities, detection limits, as well as pH dependencies of the substances. All of the compounds were electrochemically inducible with well-separated oxidation and/or reduction peaks at specific peak potentials relative to the reference electrode. Additionally, all analytes exhibited linear concentration dependency in ranges classically reported in the literature. The demonstration of these properties is a promising step toward direct multiplexed detection of P. aeruginosa in environmental and clinical samples and thus, can make a significant contribution to public health and safety.

Modulation of Paracellular-like Drug Transport across an Artificial Biomimetic Barrier by Osmotic Stress-Induced Liposome Shrinking.

Various types of artificial biomimetic barriers are widely utilized as in vitro tools to predict the passive "transcellular" transport of drug compounds. The current study investigated if the sandwich barrier PermeaPad®, which is composed of tightly packed phospholipid vesicles enclosed between two support sheets, contributes to a transport mechanism that is paracellular-like, representing one of the alternative pathways of passive transport in vivo, primarily of relevance for hydrophilic drug compounds. To this end, we pretreated the commercial PermeaPad® barrier with NaCl solutions of either high or low osmolality prior to permeation experiments on reversed Franz cell setups with hydrophilic model compounds calcein and acyclovir and hydrophobic model compounds hydrocortisone and celecoxib. Our starting hypothesis was that the liposomes formed in the barrier during the hydration step should either shrink or swell upon contact with test media (drug solutions) due to osmotic pressure difference as compared to the pretreatment solutions. Apparent permeabilities for calcein and acyclovir across the PermeaPad® barrier were found to increase approximately 2.0 and 1.7 fold, respectively, upon hypo-osmotic pretreatment (soaking in hypotonic medium, while the permeation of hydrocortisone and celecoxib remained unchanged. A control experiment with lipid-free barriers (support sheets) indicated that the permeation of all the compounds was virtually unchanged upon hypo-osmotic pretreatment. In conclusion, soaking PermeaPad® in a medium of lower osmotic pressure than that used during the permeation study appears to induce the osmotic shrinking of the lipid vesicles in the barrier, leaving wider water channels between the vesicles and, thus, allowing hydrophilic compounds to pass the barrier in a paracellular-like manner.

Microdialysis and nanofiltration allow to distinguish molecularly dissolved from colloid-associated drug concentrations during biomimetic dissolution testing of supersaturating formulations.

Many new drug entities are poorly water-soluble and thus require solubility-enhancing formulations to ensure sufficient bioavailability. On the other hand, it is more and more accepted that not all "dissolved" states of a drug contribute equally to enhanced absorption, i.e. an increase in apparent solubility does not necessarily go in parallel with an increase in molecularly dissolved drug, the latter being regarded as the key driving force for absorption. Our study aimed to provide time-resolved information on the dissolution, supersaturation, and precipitation behavior of molecularly dissolved drug as released from an amorphous solid dispersion and a surfactant-containing crystalline suspension of Posaconazole (PCZ), a weakly basic and poorly water-soluble drug. Thereby, we aimed to gain a deeper mechanistic understanding of enabling formulation principles and possibly establish a dynamic biopharmaceutical assessment tool for molecularly dissolved drug released from enabling formulations. A two-staged dissolution test, with media transition from simulated gastric fluid (SGF) to fasted state simulated intestinal fluid (FaSSIF), was performed with three alternative sampling approaches in parallel: the classical bench centrifugation approach was used to assess total dissolved concentrations, while a nanofiltration method and a microdialysis setup were tested for their ability to discriminate molecularly and colloid-associated drug concentrations over time. For comparison, a single-stage dissolution setup was performed, where a marketed PCZ suspension was dispersed in biomimetic media with increasing amounts of solubilizing agents to understand their effect on the concentration of molecularly dissolved drug. It was demonstrated that the microdialysis setup allowed to follow the molecularly dissolved drug concentration in a time-resolved manner during the single-and two-stage dissolution tests with marginal delays. Interestingly, the PCZ concentrations measured by the nanofiltration approach differed from both, the molecularly dissolved (assessed by microdialysis) and apparently dissolved (assessed by centrifuge) PCZ concentrations, indicating that nanofiltration may allow to differentiate between different colloid-associated (apparently) dissolved drug species. Moreover, it was shown that the release of the molecularly dissolved drug from an amorphous solid dispersion did not correlate at all with the results obtained by the centrifugation method: While this conventional sampling revealed a classical spring and parachute concentration/time-profile with a high degree of (apparent) supersaturation, the concentration of molecularly dissolved drug (assessed by the microdialysis setup) indicated an initial short decline of PCZ concentration, followed by a prolonged (moderate) molecular supersaturation. This observation may give rise to a re-thinking of the current mechanistic understanding of how amorphous solid dispersions enhance oral bioavailability. In essence, the current study provides data which indicate a benefit of both the microdialysis sampling and nanofiltration approaches for the in vitro biopharmaceutical assessment of enabling drug formulations.

Dissolution/Permeation of Albendazole in the Presence of Cyclodextrin and Bile Salts: A Mechanistic In Vitro Study into Factors Governing Oral Bioavailability.

We aimed to understand the impact of the interplay between bile salts and cyclodextrins on the dissolution-permeation of poorly soluble drug compounds with a moderate-strong binding constant to cyclodextrin. Phase diagrams were prepared on the chosen model compound albendazole in phosphate buffer, fasted state simulated intestinal fluid (FaSSIF), and a modified fed state simulated intestinal fluid (FeSSIFmod) with (2-hydroxypropyl)-beta-cyclodextrin (HP-ß-CD) concentrations of up to 10 % (m/m). Then we investigated the dissolution/permeation interplay of albendazole dissolved/suspended in the different media through a biomimetic barrier on a 96-well in vitro model. The apparent solubility of albendazole was enhanced by HP-ß-CD and FaSSIF/FeSSIFmod separately. However, when albendazole was dissolved in HP-ß-CD and biomimetic media together, the solubility was significantly lower than the predicted additive solubility from the solubilizing effects. It is postulated that this is due to the sodium taurocholate from the biomimetic media displacing albendazole from the hydrophobic cavity of HP-ß-CD. In the permeation experiments, the highest permeation was observed at cyclodextrin concentrations able to solubilize close to the total dose of albendazole without a major surplus of solubilization capacity. Furthermore, an over-proportional permeation enhancement was observed when both, cyclodextrin and biomimetic media were present. These results indicate that the interplay between bile salts and cyclodextrins can enhance the free (molecularly dissolved) fraction of drug in solution to a greater extent than could be obtained with one of the solubilizing components alone. In conclusion, at carefully selected cyclodextrin-concentrations in combination with biomimetic media, obviously, a transient supersaturation is induced, which is made responsible for the observed major permeation enhancement.

Best practices in current models mimicking drug permeability in the gastrointestinal tract - An UNGAP review.

The absorption of orally administered drug products is a complex, dynamic process, dependant on a range of biopharmaceutical properties; notably the aqueous solubility of a molecule, stability within the gastrointestinal tract (GIT) and permeability. From a regulatory perspective, the concept of high intestinal permeability is intrinsically linked to the fraction of the oral dose absorbed. The relationship between permeability and the extent of absorption means that experimental models of permeability have regularly been used as a surrogate measure to estimate the fraction absorbed. Accurate assessment of a molecule's intestinal permeability is of critical importance during the pharmaceutical development process of oral drug products, and the current review provides a critique of in vivo, in vitro and ex vivo approaches. The usefulness of in silico models to predict drug permeability is also discussed and an overview of solvent systems used in permeability assessments is provided. Studies of drug absorption in humans are an indirect indicator of intestinal permeability, but both in vitro and ex vivo tools provide initial screening approaches and are important tools for assessment of permeability in drug development. Continued refinement of the accuracy of in silico approaches and their validation with human in vivo data will facilitate more efficient characterisation of permeability earlier in the drug development process and will provide useful inputs for integrated, end-to-end absorption modelling.

'Stirred not Shaken!' Comparing Agitation Methods for Permeability Studies Using a Novel Type of 96-Well Sandwich-Plates.

In order to achieve a high sample throughput, permeation experiments are often carried out using 96-well sandwich plates. Even though agitation is regarded as important, permeation studies in 96-well format are often carried out without agitation since orbital shaking, the most common agitation method for 96-well plates, has been reported to create difficulties (e.g., well-to-well cross-talk), and high cost and low availability limits the use of other agitation techniques (e.g., magnetic stirring). This study investigates how orbital shaking and magnetic stirring affect the apparent permeability of model compounds with different water-solubilities (methylene blue, carbamazepine, and albendazole) using a novel 96-well sandwich plate comprising a cellulose-hydrate membrane (PermeaPlain® plate). Orbital shaking was found less efficient than magnetic stirring in terms of homogeneously distributing a small volume of dye within the donor compartment. Furthermore, in terms of achieving maximum trans-barrier flux, magnetic stirring was found a more effective agitation method than orbital shaking. Obviously, with orbital shaking the medium in the bottom compartment of the sandwich plates never was mixed in-phase. The impact of insufficient mixing on permeation was found strongest with the most lipophilic compound, which correlates with literature reports that the contribution of the unstirred water layer towards the overall resistance of the barrier is most expressed in case of lipophilic drugs. Finally, it was tested how different liquid volumes in the bottom compartment of the plates affect the well-to-well cross-talk during permeation experiments under orbital shaking. This study revealed that 250-300 µL should be used in the bottom compartment of the sandwich plates to reduce well-to-well cross-talk when using orbital shaking for agitation.